Category Archives: Commentary

Commentary

Tasty Food – Utah Hotel

Leave a comment
Tasty Food - Utah Hotel

Tasty Food – Utah Hotel. San Francisco, California. August 18, 2009. © Copyright G Dan Mitchell – all rights reserved.

Tasty Food restaurant in the Utah Hotel, San Francisco, California.

This dilapidated old building is by now more or less a landmark on this corner on Fourth Street at the base of the freeway off-ramp. I figured it would have been condemned years ago when I first saw it while walking to downtown San Francisco from the train station, but it still stands and even appears to get a new coat of paint from time to time.

This photograph is not in the public domain. It may not be used on websites, blogs, or in any other media without explicit advance permission from G Dan Mitchell.

Web: G Dan Mitchell Photography
Twitter: http://twitter.com/gdanmitchell
Friendfeed: http://friendfeed.com/gdanmitchell
Facebook: http://www.facebook.com/gdanmitchell

keywords: san francisco, california, usa, travel, scenic, urban, city, utah, hotel, tasty, food, restaurant, trumer pils, pabst, blue, ribbon, beer, sign, parking, meter, light, signal, pole, alarm, light, door, window, pipe, sidewalk, street, urban, city, downtown, dilapidated, run down, awning, bright, paint, green aqua, red, orange, purple, tile, reflection, flower, stock

Commentary, News, Shows, Workshops

Night photography news – time to catch up!

2 Comments

It has been far too long since I’ve posted on the subject of night photography, one of the subjects that interests me a great deal. There is so much other stuff for me to photograph during the summer months – urban and natural landscape, “my” Sierra Nevada, the coast, and so on – that I tend to slack off on the night photography this time of year. However, as summer draws to an end, night photography is one subject that seems to increasingly begin to interest me again.

So, with that in mind, a few notes related to the subject.

Late last week fellow SF Bay Area photographer Ivan Makarov contacted me to say that he was organizing a group of photographers to do a night photography shoot at the Mare Island Naval Ship Yard. He knew that I have shot there in the past (lots of examples in my night photography gallery) and asked for some advice about access and locations. I shared with him a bit of what I know about the location and also connected him with Tim Baskerville of The Nocturnes, the SF Bay Area night photography group since Tim is our local guru of all things related to night photography. After consulting with Tim and getting permission from the folks at Mare Island, Ivan got back to me and I decided to join his group. I won’t spoil the fun by saying too much here, but I’m currently working on photographs from the outing and they will show up here in a few weeks. (Impatient readers can get an early look by checking out my Flickr stream.)

So, since the pump was primed with that bit of night photography last weekend, I’ll catch up with the night photography news.

One great source for night photography information – and especially for coverage of shows featuring night photographers – is Andy Frazer’s Night Photography Blog. Recent news at his blog includes the following:

  • An opening this week of a night photography show in Alameda featuring the work of several well-know local night photographers: Troy Paiva, Mike Hows and Joe Reifer. Follow the first link in this bullet to find more info about the location, times/dates, and the opening reception.
  • Also during the month of August Any kept up a steady stream of posts highlighting a number of compelling examples of night photography – visit the blog and take a look.

Over at The Nocturnes Night Photography Blog you’ll find some seemingly random quotations… mixed in with some very interesting posts on local night photography events and shows.

I’m hearing rumors of an upcoming Mare Island Reunion for previous participants in The Nocturnes workshops. If you are a  past Nocturnes participant and you haven’t heard from Tim… you might want to check this out.

Finally, if you are looking for some information on how to do night photography, let me point out two resources:

  • The Nocturnes web site is the portal to a ton of information on the subject, ranging from technique to photographer to workshop opportunities. I strongly recommend that you visit!
  • For a very quick list of some basic considerations for night photography, take a look at my own Hints for Night Photography post.
Commentary, Equipment

Canon 7D – shows how little I know!

Leave a comment

Earlier I posted some pre-announcement thoughts about the Canon EOS 7D – including my uninformed speculation about a move to full frame sensors which, I now have to admit, didn’t amount to much… ;-)

The new 7D seems to me to be the logical replacement for or repositioning of the X0D series bodies, Canon’s best-equipped 1.6x cropped sensor bodies. My feeling is that this camera is the camera that would have followed next in the XOD series – e.g. – it could have been a 60D – but that Canon has several reasons for now identifying it as a 7D instead. These might include: Continue reading Canon 7D – shows how little I know! →

Commentary

OS X 10. 6 “Snow Leopard” installed – and printer problems ensue.

46 Comments

I was actually on the beta test list for “Snow Leopard,” so I have been using it without problems for a while – but not on the computer I use for my photographic work but rather on a separate laptop. After the very trouble-free experience on the test machine I went ahead and installed in on my photography workstation yesterday.

Today I tried to print. Ouch!

The first problem I encountered was that the Epson 2200 sitting next to my computer no longer appeared in the the printer dialogs in Photoshop. Knowing that Snow Leopard supposedly will add new drivers as needed I tried to use the 10.6 preference panel to add drivers for the 2200. No luck – the system didn’t even see the connected printer.

I finally went to the Epson web site and followed their instructions which include:

  1. Install Rosetta from Apple install disk.
  2. Download the most recent pre-10.6 drivers for my printer and install.
  3. Download and run their updater for drivers under 10.6

Done. Now I can see the printer via its Firewire connection… but not, as far as I can tell, via its USB connection.

So, I fire up Photoshop and try to make a test print using a black and white image. Things seem to be going more or less OK as I work my way through the usual setup and print process: Photoshop manages colors and all. But the print emerges looking very green and way too dark. I attempt to download and reinstall the Epson profile for the Epson Premium Lustre paper I’m using at the moment. Installer downloads… but won’t run.

I do a restart and try the profile installer one more time – still no go. Since the photo was one that I had not previously printed I decide to remove one variable and instead print a color image that I had successfully printed right before installing the update to OS X. Again… very greenish and far too dark.

There is no joy here at the moment…

Update 8/31/09:

  • I will try to continue reporting on my CS4/Epson 2200/Snow Leopard printing issue as I continue to try to understand and resolve it. This may take a while, as I don’t have any urgent printing business to take care of.
  • As a – otherwise very successful – beta tester of Snow Leopard, I should not have allowed my enthusiasm for the new OS and otherwise good experience with it on the test machine to blind me to the standard practice of waiting a while to install on my production machine. Some of us never learn!
  • Other than this issue – serious to me, but probably a non-issue to most – the upgrade has otherwise been positive. One pleasant surprise was that the installation gave me back 125GB of space on my main drive!
  • I welcome any information about the printer issue that you may have. Please either leave a comment or send me an email.