Tag Archives: 10.6

New Drivers (finally) Resolve Mac OS X 10.6 Epson 2200 Printing Problems

(IMPORTANT NOTE: I generally do not remove old articles from this web site since search engines and other links tend to point to them. This short article and link to Epson 2200 printer drivers was accurate when it was originally posted, but you should consult current information sources and perhaps contact Epson directly for update information. In all likelihood, based on my past experience, this printer and other older Epson printers will not be supported indefinitely by Epson. For my part, I would not get a 2200 at this point, no matter how cheap it was – and I have not owned a 2200 since perhaps 2010 or so.)

A while back I posted about serious problems with the Epson 2200 printer when used with Apple’s Mac OS X 10.6.x “Snow Leopard” operating system. I won’t recount the whole story here (that’s what links are for!) but the short version is that Epson had not updated their drivers when Apple released the OS update, and then Epson failed to communicate with their customers or update the drivers in a timely fashion – leaving photographers who used several of their printers including the 2200 “high and dry.”

The good news is that Epson did release updated drivers during the past week. The updated driver appears to resolve the very serious printing problems that rendered the 2200 essentially unusable for several months.

Update on the Epson 2200 and Snow Leopard OS 10.6 Problems

Earlier I wrote that installing Snow Leopard on my Macs instantly turned my Epson 2200 printer into a very large paperweight. It is completely unusable for quality printing now. Over the past few days I’ve been working to try to find out what is going on, whether there is a work-around, and what Epson recommends to resolve the issue.

I can now report that…

… the printer still doesn’t work and Epson is completely silent on the whole issue.

If you have a 2200 (or any of several other popular Epson printers of similar vintage) it is my recommendation that you should not upgrade to OS 10.6 Snow Leopard until this is sorted out – or you may well lose the use of your printer.

I’ve summarized some additional information about the situation in a comment that I have added to the original post.